Bringing doctors together

or

A free, private network for verified physicians

Leading voices

Dr. Keith Kaye

General ID · RU

View

Dr. Rochelle Walensky

General ID · Harvard Medical School

View

Dr. Erin Bonura

General ID · OHSU

View

Dr. Nizar Wehbi

General ID

View

Dr. Robert Schooley

General ID · UCSD

View

Dr. Priya Nori

General ID · MMC

View

Dr. Jan Patterson

General ID · UTHSCSA

View

Dr. Kavita Bhavan

General ID · Dallas County Hospital District

View

Dr. John Goldman

General ID · UPMC Central PA

View

Dr. Gonzalo Bearman

General ID · Medical College of Virginia

View
  • Discover your community

  • Stay current

  • A profile that represents you

  • Find your people

About RoonPrivacyTerms

    Overview

    A decade of clinical microbiology: top 10 advances in 10 years: what every infection preventionist and antimicrobial steward should know.

    Jan 25, 2024DOI: 10.1017/ash.2024.10Journal ArticleASHE

    Written by: Tulip A JhaveriZoe Freeman WeissMarisa L WinklerAlexander D PydenSankha S BasuNicole D Pecora

    Find these authors on Roon

    TJ
    Dr. Tulip Jhaveri
    General ID · UMMC

    Introduction

    The past 10 years have brought paradigm-shifting changes to clinical microbiology. This paper explores the top 10 transformative innovations across the diagnostic spectrum, including not only state of the art technologies but also preanalytic and post-analytic advances (Table 1). Clinical decision support tools (CDST) have reshaped testing practices, curbing unnecessary tests. Innovations like broad-range polymerase chain reaction (PCR) and metagenomic sequencing, whole genome sequencing (WGS), multiplex molecular panels, rapid phenotypic susceptibility testing, and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) have all expanded our diagnostic armamentarium. Rapid home-based testing has made diagnostic testing more accessible than ever. Enhancements to clinician–laboratory interfaces allow for automated stewardship interventions and education. Laboratory restructuring and consolidation efforts are reshaping the field of microbiology, presenting both opportunities and challenges for the future of clinical microbiology laboratories. Herein, we categorize these laboratory advances as preanalytic, analytic, post-analytic, and other to reflect how these would be implemented in clinical care. A timeline is provided to demonstrate when in the past 10 years these technologies or innovations emerged (Fig. 1).Table 1.Overview of the top ten innovations in clinical microbiology over the past decade, highlighting their applications, key benefits, and associated challengesInnovation areaApplicationsKey benefitsChallenges/LimitationsPreanalyticClinical decision support toolsBest-practice alertsGuidelines and algorithmsIndication selection using guided test orderingChange in order setsDrive appropriate test selectionPrevent overutilization of tests in low-impact situationsDecreased testing when actually indicatedAlert fatigue leading to clinicians overriding alertsProvider and IT pushbackHost Pathogen ResponseInflammatory markers (Procalcitonin)Urinalysis Reflex to CultureAntibiotic discontinuationDiagnostic stewardshipSpecificity and ReproducibilityUtilization managementIntegration with microbiologyAnalyticSequencingBroad range PCR, targeted NGSMetagenomic sequencingWhole genome sequencingIdentification of organisms directly from clinical specimens, even when culture negativeHigh species level resolution for organism identificationDetermine strain relatedness for epidemiological purposesSensitivity and specificity dependent on preanalytic factorsResults can be difficult to interpret when commensal organisms or contaminants are identifiedUnknown how to report and act upon WGS data in real-timeDoes not provide phenotypic susceptibility dataMultiplex panelsSyndromic-based testingAntibiotic stewardshipAvoid decision fatiguePositive results not always clinically relevantExpenseRapid susceptibility testingNovel methods of rapid susceptibility testingGuides early selection and use of optimal antibioticsRequires adjudication of discrepancies between rapid AST and finalized traditional AST resultsMALDI TOF MSBacterial, fungal identification from isolatesImproved accuracyShorter turnaround timeCapital costsOver-reportingHome testingRapid home-based antigen testsConveniencePrivacyAccessTest performance and result interpretationPotential cost per testQuality control of the testing componentsLinkage to care and inclusion in the EMRTracking of any results that are of concern for public healthPost analyticClinician-lab interfaceFramingCascade reportingSelective reportingResult review and feedbackGuides appropriate decision-making following test resultsAutomates stewardship interventions and educationLimiting clinician’s input leading to missed diagnosisOtherLaboratory consolidationAcquisition by commercial laboratoriesCentralized/localized testing within a health systemTotal laboratory automationIncreased cost savings and efficiencyConcentration of resources/expertise/ technology within a network to provide access to highest quality across the systemUniform adherence to stewardship best practices and guidelinesIncreased turnaround time for results to remote sitesLogistical challenges, such as specimen stabilityRisk for financial considerations to drive decisions at the expense of patient safety or quality
    Overview of the top ten innovations in clinical microbiology over the past decade, highlighting their applications, key benefits, and associated challenges
    Figure 1.Timeline demonstrating the top innovations over the last 10 years. Though some technologies were developed prior to 2013, these dates reflect their emergence in mainstream clinical microbiology.
    Timeline demonstrating the top innovations over the last 10 years. Though some technologies were developed prior to 2013, these dates reflect their emergence in mainstream clinical microbiology.

    Preanalytic

    Clinical microbiologists have known for a long time that preanalytical issues are often the most important, yet overlooked, factors in producing high-quality results. For instance, emphasizing good specimen collection using appropriate techniques and having quality criteria for working up cultures from non-sterile sites. The focus of preanalytic innovations over the past decade has shifted to behavioral economics using automated system-based CDST to nudge clinicians earlier in clinical workup for better utilization of diagnostic tests.1,2 Antimicrobial stewardship programs combined with information technology staff have played a crucial role in the design and implementation of CDST. Some examples of these novel interventions include:Best-practice alerts (BPAs) to stop unnecessary diagnostic testing in patients without symptoms of infection. For example, firing BPAs when ordering urine testing in asymptomatic patients led to reduced urine culture ordering and reduced antibiotic orders3 Utilizing Electronic Medical Record (EMR) hard and soft stops if a patient is not meeting criteria for Clostridium difficile testing: <1 year old, laxatives within 48 hours, or < 3 loose stools in 24 hours led to reduced testing and positive clinician perception.4,5.Guidelines and algorithms to promote appropriate testing practices. Examples include algorithms to reduce unnecessary blood culture collection6,7 or urine culture reflex based on predefined urinalysis criteria to reduce unnecessary workup for urine cultures and administration of antibiotics.8Indication selection using restrictive or guided test ordering via built-in EMR algorithms to drive appropriate test selection. Examples include requiring a clinician to input an approved indication on an order set before ordering a urine culture,9,10 endotracheal aspirate culture,11 rapid multiplex respiratory pathogen panel,12 or rapid multiplex meningitis panel.13Change in order sets—for instance, removing urine cultures from standard admission order sets to prevent overutilization in low-yield situations led to decreased urine cultures ordered14,15
    Best-practice alerts (BPAs) to stop unnecessary diagnostic testing in patients without symptoms of infection. For example, firing BPAs when ordering urine testing in asymptomatic patients led to reduced urine culture ordering and reduced antibiotic orders3 Utilizing Electronic Medical Record (EMR) hard and soft stops if a patient is not meeting criteria for Clostridium difficile testing: <1 year old, laxatives within 48 hours, or < 3 loose stools in 24 hours led to reduced testing and positive clinician perception.4,5.
    Guidelines and algorithms to promote appropriate testing practices. Examples include algorithms to reduce unnecessary blood culture collection6,7 or urine culture reflex based on predefined urinalysis criteria to reduce unnecessary workup for urine cultures and administration of antibiotics.8
    Indication selection using restrictive or guided test ordering via built-in EMR algorithms to drive appropriate test selection. Examples include requiring a clinician to input an approved indication on an order set before ordering a urine culture,9,10 endotracheal aspirate culture,11 rapid multiplex respiratory pathogen panel,12 or rapid multiplex meningitis panel.13
    Change in order sets—for instance, removing urine cultures from standard admission order sets to prevent overutilization in low-yield situations led to decreased urine cultures ordered14,15
    Challenges: These interventions may inadvertently reduce testing in situations where it is indicated, for instance, not obtaining urine cultures in asymptomatic pregnant women. Most importantly, implementation challenges such as “alert fatigue” due to overuse of electronic reminders disrupting usual workflow or “provider pushback” due to conflicts between CDST recommendations and provider expertise or beliefs lead to clinicians ignoring or overriding these alerts.16,17 Resources such as information technology staff are additionally utilized during integration of these tools into clinical practice.
    Integration of the host immune response to pathogens into infectious disease diagnostics has seen substantial expansion in the past decade. Two of the major areas of growth include:Monitoring of inflammatory markers—the most notable change is the use of procalcitonin for guidance in discontinuation of antibiotic treatment in certain patient populations (critically ill, lower respiratory tract infections, and in certain pediatric populations).18Incorporation of cell counts and differentials in guiding specimen adequacy and likelihood of infection—this has been most notably used in urinalysis reflex to urine culture, in which demonstration of pyuria (commonly defined in urine as >10 WBC/hpf) is required before performing urine culture. This has led to a significant decrease in unnecessary workup of urine isolates.19,20 Similar approaches to using cell counts or inflammatory markers have been utilized in the workup of meningitis/encephalitis as well as periprosthetic joint infection. Although the methodology for measurement has not changed dramatically in the past decade, their utilization in stewardship and influence on the workup of microbiology specimens has considerably increased in the past 10 years and is now the standard of care.
    Monitoring of inflammatory markers—the most notable change is the use of procalcitonin for guidance in discontinuation of antibiotic treatment in certain patient populations (critically ill, lower respiratory tract infections, and in certain pediatric populations).18
    Incorporation of cell counts and differentials in guiding specimen adequacy and likelihood of infection—this has been most notably used in urinalysis reflex to urine culture, in which demonstration of pyuria (commonly defined in urine as >10 WBC/hpf) is required before performing urine culture. This has led to a significant decrease in unnecessary workup of urine isolates.19,20 Similar approaches to using cell counts or inflammatory markers have been utilized in the workup of meningitis/encephalitis as well as periprosthetic joint infection. Although the methodology for measurement has not changed dramatically in the past decade, their utilization in stewardship and influence on the workup of microbiology specimens has considerably increased in the past 10 years and is now the standard of care.
    Challenges: Specificity remains a significant limitation to using host–pathogen response markers to guide treatment. Treatment markers such as C-reactive protein (CRP) and procalcitonin can be elevated in a variety of infectious and inflammatory conditions, and despite their long standing use, are often improperly used.21,22 Inclusion of additional markers such as tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) and other proteins have helped refine this approach but is still early in its use.23 Another challenge is a lack of integration between the microbiology laboratory and the laboratories that monitor the host immune response (eg, CRP, procalcitonin in chemistry, cell counts in hematology). Closer interactions between clinical laboratory sections will be crucial in the successful utilization of these approaches.

    Analytic

    Various sequencing methods have become integral for identifying organisms and defining taxonomy, whether directly from specimens or from cultured isolates.24 In microbiology labs, initial efforts are made to identify isolates using conventional techniques. However, if these conventional methods prove unsuccessful, labs have the option to either perform sequencing in house (if they have the capability) or send isolates to reference labs for a definitive identification through sequencing. Sequencing results are often used as the “gold standard” for species-level identification.
    Despite being colloquially referred to as “universal PCR,” broad-range PCR is restricted to selecting ribosomal subunits specific to either fungi or bacteria. Additional broad-range targets, such as rpoB, may be used to further differentiate among groups such as acid-fast bacteria.25 Some laboratories will require clinicians to choose the relevant targets for testing. Fresh frozen tissue is generally the preferred specimen. It is also possible to perform sequencing on formalin-fixed paraffin-embedded tissue (FFPE). The sensitivity of sequencing from FFPE specimens may be compromised or reduced after the fixation process. In general, samples with concurrent pathology that do not demonstrate histopathological evidence of infection are unlikely to yield positive results by sequencing and efforts should be made to discourage sequencing in these scenarios.26,27
    Challenges: Sequencing is not available in most clinical microbiology laboratories. Commercially available options, such as University of Washington or Mayo Clinical Laboratories, are often expensive and the overall turnaround time can range from 1 to 4 weeks. Because most laboratories only send sequencing in instances where traditional microbiological methods are negative or inconclusive, clinical laboratories must have some way of retaining, tracking, and freezing specimens where sequencing is requested, but initial results are still pending (to avoid accidentally discarding specimens). There is variability in sensitivity as compared to culture-based methods, depending on the specimen source, fixation process, and correlative histopathology. Sequencing results must be correlated clinically, usually by a clinical microbiology or infectious disease clinician, as sequencing of contaminants may occur and result in provider confusion.
    In recent years, the use of mNGS (a massively paralleled, rapid, high throughput method of sequencing all the genetic material in a clinical sample) and WGS (sequencing of entire organism genomes) has entered into mainstream clinical use.28,29 These technologies have generally required significant bioinformatic/computational analysis and, outside of large academic medical centers, are typically confined to reference laboratories. This is starting to change with commercially available software solutions.
    mNGS assays can be used directly on primary specimens. For example, NGS metagenomics can be performed on CSF and may be used for detection of RNA viruses.30 In recent years, there has been increased interest in organism identification directly from blood samples, bypassing culture incubation steps. NGS directly from plasma is available commercially, using cell-free DNA sequencing (sequencing small fragments of DNA released into the bloodstream) to identify pathogens both within the bloodstream and at distant sites of infection. This novel concept of a “liquid biopsy” is gaining popularity, especially in identifying organisms when traditional methods are negative or where invasive biopsy is contraindicated.31
    Pathogen WGS (sequencing from pure or highly enriched isolate preparations) is also entering mainstream clinical microbiology laboratories. WGS is most routinely used to characterize bacterial specimens for purposes such as high-resolution identification of unusual isolates, investigations into novel antimicrobial resistance genes, and assessments of relatedness for infection control and epidemiological purposes.32 Although fungal WGS is still a developing method, viral WGS became a critical tool to understand epidemiology and spread during the COVID-19 pandemic.33
    Challenges: Sequencing of clinical specimens presents a number of challenges that limit widespread use of these technologies. Besides high costs and variable turnaround times,34 the lack of understanding of what pathogens are being tested and the optimal timing of testing may cause clinicians to not order appropriate testing (eg, when suspecting certain viruses or parasites that are not included in the reference NGS database) or miss the window of opportunity for optimal testing (eg, most arboviral infections do not exhibit detectable levels of RNA in the CSF beyond the first 1-2 weeks after the infection’s onset, limiting the sensitivity of this test in the later diagnostic stages35,36). Clinicians may erroneously want to use mNGS sequencing methods to “rule out infection”37 despite lack of data on use for this indication. Most importantly, test interpretation and reporting remain a critical problem. mNGS detection of multiple organisms within a clinical sample may often include detection of commensal or nonpathogenic organisms that may be misleading to clinicians and lead to excessive treatment38 or additional diagnostics that would not have otherwise been ordered.37,39,40 Adjudication by clinical microbiologists or infectious disease physicians should be performed in all cases.
    WGS from cultured isolates also produces an incredibly rich data set; however, the real-time clinical utility of WGS data is still an area in need of development. Challenges include predicting the phenotype of genomic antibiotic resistance results and understanding the threshold for relatedness when comparing genomes from potentially related strains as part of outbreak investigations. There are lack of clear guidelines as to which genetic information should be reported to the clinician and little guidance on how this information should be acted on, if at all.
    Multiplex PCR panels are commercially available for multiple specimen sources including upper respiratory tract, lower respiratory tract, blood, stool, prosthetic joint, abdominal, and genitourinary tract (Table 2). These panels include multiple organism targets common to a particular infectious syndrome. This can reduce cognitive error when providers are required to order multiple tests separately and their rapid turnaround time can theoretically reduce broad-spectrum antimicrobial use, though this has not consistently been found to be the case in studies unless testing is coupled with antimicrobial stewardship feedback.41 The maximal benefit of these tests is realized if they are able to be run on all shifts, with relatively short turnaround times, which can cause significant logistical issues for laboratories, particularly given current staffing shortages.42,43
    Table 2.Summary of FDA approved commercially available multiplex assays including targets, source, methodology, turnaround time, and clinical caveatsBloodNameManufacturerOrganism targetsGene targets resistance genes (RGs)Specimen sourceTechniqueTurnaround timeClinical caveatCitationBiofire Blood culture identification (BCID) 2 panelBiomerieux7 yeast, 26 bacterial10 RGsPositive blood culture bottlemPCR1 hourDetects multiple targets in polymicrobial samples95ePlex BCID Gram-positive panelGenMarkDx20 organisms, pan-Gram-negative and pan- Candida4 RGsPositive blood culture bottlemPCR1.5 hoursDetects multiple targets in polymicrobial samples96ePlex BCID Gram-negative panelGenMarkDx21 organisms, pan-Gram- positive and pan-Candida7 RGsPositive blood culture bottlemPCR1.5 hoursDetects multiple targets in polymicrobial samples96ePlex BCID Fungal panelGenMarkDx15 organismsNonePositive blood culture bottlemPCR1.5 hoursDetects multiple targets in polymicrobial samples96Verigene Gram-positive panelDiasorin13 organisms3 RGsPositive blood culture bottleNanoparticle probe2.5 hoursUnreliable for polymicrobial samples97Verigene Gram-negativeDiasorin9 organisms6 RGsPositive blood culture bottleNanoparticle probe2.5 hoursUnreliable for polymicrobial samples97T2Bacteria panelT2Biosystems5 organismsNoneDirect from bloodNMR3-5 hoursLower limit of detection98T2Candida panelT2Biosystems5 organismsNoneDirect from bloodNMR3-5 hoursLower limit of detection99Accelerate Pheno and blood culture panelAccelerate diagnostics14 bacteria, 2 yeastSusceptibility to 17 agentsPositive blood culture bottlePNA-FISH, morphokinetic cellular analysis2-7 hoursUnreliable if multiple organism morphologies or polymicrobial samples100Upper respiratoryNameManu-facturerOrganism TargetsGene targetsSpecimen sourceTurnaround timeCostBiofire FilmArray respiratory pathogen panelBiomerieux17 viruses, 3 bacteriaNoneNasopharyngeal (NP) swabmPCR1 hourRequires pairing with ASP to reduce antimicrobial utilization101Biofire Respiratory 2.1-EZ panelBiomerieux15 viruses, 4 bacteriaNoneNP swabmPCR45 minutesRequires pairing with ASP to reduce antimicrobial utilization102Verigene Respiratory pathogens flexLuminex13 viruses and 3 bacteriaNoneNP swabmPCR2 hoursRequires pairing with ASP to reduce antimicrobial utilization103eSensor Respiratory virus panelGenMarkDx14 virusesNoneNP swabmPCR6 hours104ePlex Respiratory virus panel 2GenMarkDx16 viruses, 2 bacteriaNoneNP swabmPCR3 hoursRequires pairing with ASP to reduce antimicrobial utilization104*Lower respiratoryBiofire FilmArray pneumonia panelBiomerieux8 viruses, 18 bacteriaRGsSputum or BALmPCR1 hourRequires pairing with ASP to reduce antimicrobial utilization105GastrointestinalBiofire FilmArray GI panelBiomerieux5 viruses, 11 bacteria, 4 parasitesNoneStoolmPCR1 hourCannot differentiate between live and dead organisms, high rates of colonization with unclear clinical significance106xTAG GI Pathogen panelLuminex3 viruses, 8 bacteria, 1 bacterial toxin, 3 parasitesNoneStoolmPCR5 hoursCannot differentiate between live and dead organisms, high rates of colonization with unclear clinical significance107BDMax Enteric bacterial panelBD4 bacteriaNoneStoolmPCR3.5 hoursCannot differentiate between live and dead organisms108BDMax Extended enteric bacterial panelBD8 bacteriaNoneStoolmPCR3.5 hoursCannot differentiate between live and dead organisms109BDMax Enteric viral panelBD5 virusesNoneStoolmPCR3 hoursCannot differentiate between live and dead organisms110BDMax Enteric parasite panelBD3 parasitesNoneStoolmPCR4.5 hoursLower sensitivity than conventional methods111Verigene Enteric pathogens panelDiasorin2 viruses, 5 bacteria, 2 bacterial toxinsNoneStoolmPCR2 hoursCannot differentiate between live and dead organisms, high rates of colonization with unclear clinical significance112JointBiofire joint infection panelBiomerieux15 Gram-positive, 14 Gram-negative, 2 yeast20 RGsSynovial fluidmPCR1 hourMissing many common causes of prosthetic joint infections113CNS*Biofire meningitis/Encephalitis panelBiomerieux7 viruses, 6 bacteria, 1 yeastNoneCerebrospinal fluidmPCR1 hourCannot fully replace traditional diagnostics114Note.ASP: antibiotic stewardship program.
    Summary of FDA approved commercially available multiplex assays including targets, source, methodology, turnaround time, and clinical caveats
    Note.
    ASP: antibiotic stewardship program.
    Challenges: There are downsides to the use of multiplex panels. One of these is significant testing costs, which are inconsistently covered by insurance, leading to either a high bill to the patient or a high cost to the laboratory. Additionally, all components of these panels are not necessarily understood by all clinicians, which can create confusion and inappropriate additional testing or treatments without clear interpretation guidelines. Panels are often not customizable, though some companies offer panels with extension options.44 Excessive targets may result in multiple positive targets that do not always fit the clinical picture, such as with stool multiplex panels45 and the detection of colonizing forms of Clostridium difficile 46 or species of Escherichia coli that lack clinical guidelines regarding treatment or significance (Enteroaggregative E. coli, Enteropathogenic E. coli). Positive results may lead to confusion from patients and providers or lead to unnecessary treatment. These testing panels have significant promise to decrease testing turnaround time and improve diagnostic accuracy, but their successful implementation requires stewardship integration for test appropriateness and interpretation.
    In addition to rapid detection of molecular targets, another advance has been the introduction of rapid phenotypic susceptibility testing. Traditional antimicrobial susceptibility testing (AST) can take 24–48 hours to result after isolation of cultured organisms. To expedite this process, rapid AST can be performed manually by direct use of positive blood culture broth as the inoculum for conventional methods using disk diffusion techniques with results in up to 6 hours.47 However, this is a laborious practice and not widely used. Novel, less labor-intensive phenotypic susceptibility methods that mimic results produced by standard AST have become commercially available and represent an area of rapid growth. Novel methods include detection of changes in cell morphology induced by antimicrobials using single cell microscopy, assessing the rate of cell division, examining gene expression patterns, or detection of volatile organic compounds.48 One commercially available system in the US performs AST approximately 7 hours from positive blood cultures using time-lapse imaging under dark-field microscopy, monitoring morphological and kinetic changes in the bacteria to determine MICs.49 Several other rapid AST platforms are in the development pipeline. Rapid AST should be paired with rapid identification, as MIC results and their correlative breakpoints are only interpretable when paired with the organism ID. Institutions may choose platforms that pair rapid ID with rapid AST or use separate instruments to achieve this.
    Challenges: Implementation of rapid AST methods requires monitoring and adjudication of discrepancies between rapid AST and finalized traditional AST results if both methods are performed.50 Institutions should consider how they will alert providers or stewardship teams of rapid results, particularly if rapid AST is run on all shifts in institutions that are used to receiving updated susceptibility reports only during day shift hours.
    Perhaps the most impactful technological innovation in the clinical microbiology laboratory over the past decade has been the introduction of matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF) for the identification of routine clinical bacterial and fungal isolates. This technique involves the untargeted proteomic spectral analysis directly from bacterial or fungal colonies and rapid species-level identification through a growing highly diverse database. The first FDA-approved MALDI-TOF MS instruments were introduced in 2013, and since that time, these platforms have largely replaced many of the time and labor-intensive biochemical methods that had been the primary method of identification in laboratories for over a half century. In addition to more accurate species identification, MALDI-TOF MS provides significant reduction (12–48 hours) in turnaround times for identification.51,52 More recent and ongoing advances involve the application of the methodology for acid-fast bacteria, Nocardia,53 and mold identifications54 as well as applications in epidemiological investigations and antibiotic resistance.55
    Challenges: Despite this significant impact and low reagent costs, the relatively high capital costs of MALDI-TOF MS instrumentation have slowed its adoption, particularly in smaller laboratories. Also, the discontinuation of conventional biochemical assays results in a lack of robustness during planned or unplanned instrument “downtimes.” Finally, its ease of use coupled with its rapid and accurate identification to species level has resulted in reporting of organisms, which may not have been easily reported in the past, such as certain coagulase-negative staphylococcal or alpha-hemolytic streptococcal species. This “overreporting” can lead to confusion amongst clinicians not familiar with these organisms and may lead to an increase in their unnecessary treatment. Therefore, the inclusion of laboratory and antimicrobial stewardship is recommended during implementation.
    The COVID-19 pandemic accelerated what was already a widespread interest in patient-centered infectious disease testing, including samples which are patient collected but analyzed by a clinical laboratory as well as fully home-based testing.
    Patient-collected samples have become a popular method for diagnosing sexually transmitted infections, including Neisseria gonorrhoeae, Chlamydia trachomatis, and Trichomonas vaginalis.56–58 With the COVID-19 pandemic, self-collection of anterior nares (AN) specimens for respiratory viral testing59 was also utilized in many situations, though concerns for the sensitivity of AN swabs for viruses such as RSV60 and adenovirus61 may limit respiratory self-testing for other infections. Convenience, privacy, and access are major advantages of self-collected specimens, and analyses of self-collection tend to support both the quality of the result as well as a positive effect on test uptake/utilization.62 Linking self-collected specimens with telemedicine (rather than traditional clinic visits with a provider) enhances access as well as speed and flexibility.63,64 In addition to established healthcare routes that incorporate self-sampling with and without telemedicine, there are also several companies that provide self-collection kits for sexually transmitted diseases, respiratory viruses, and urinary tract infections, distributed in the context of remote providers.65
    Challenges: The discussion around home-based testing without associated telemedicine visits is far more complex. Fully home-based FDA-cleared infectious disease testing had been confined to assays for HIV before at-home COVID and COVID/Influenza tests became available under Emergency Use Authorization (EUA). To allow for kit stability, ease of use, and clear interpretation, home-based tests are usually antigen-detection lateral-flow assays that wick a patient’s sample across test and control zones and deliver a result through the appearance of a colored spot or line. Generally speaking, these tests do not have the same sensitivity (and often specificity) as molecular assays66 and a great deal of debate has occurred over what constitutes sufficient sensitivity.67 During the COVID-19 pandemic, at-home molecular assays were also developed and are a promising tool for future at-home testing.68 Concerns about at-home testing include test performance and result interpretation, potential cost per test (often out of pocket),69 quality control of the testing components/process, linkage to care and inclusion in the EMR, and tracking of any results that are of concern for public health.70,71
    The public focus on at-home testing and telemedicine during the COVID-19 pandemic has brought the issues surrounding both self-collected laboratory testing and at-home testing into the spotlight. The challenges of self-collected testing largely involve sample/transport device stability/performance and quality of sample collection.65 The advantages of privacy, agency, convenience, and increased test uptake are so substantial that, despite concerns about quality and care linkage, it is expected that these patient-centered testing approaches will expand in the future.72

    Post-analytic

    Another significant advancement in the clinical microbiology laboratory has been the enhancement of the clinician–laboratory interface with the help of nudging strategies to guide appropriate decision making while maintaining prescriber autonomy.73 Some examples of these novel interventions include:Framing: combines results with free text or educational materials to provide context for the results, changing their relative attractiveness. Examples include adding interpretative guidance on respiratory cultures growing normal commensal flora with a comment “no Methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa isolated74,” adding a nudge on a positive C. difficile nucleic acid amplification test with negative toxin enzyme immunoassay test to “consider colonization or early infection,”75 adding interpretation guidance for coagulase-negative staphylococci growing in one of four blood culture bottles (one of two sets) as “possible contaminant,” and adding an interpretive comment on respiratory cultures for β-lactamase-negative Haemophilus influenzae or Moraxella catarrhalis stating, “this organism is predictably susceptible to ampicillin or amoxicillin.”76Cascade reporting: reports narrow-spectrum agents initially with subsequent susceptibilities reported only on resistant organisms, for example, reporting only ceftriaxone on ceftriaxone-susceptible Escherichia coli and Klebsiella species77 and only cefazolin on cefazolin-susceptible gram-negative organisms.78 The goal of these interventions is often to reduce the use of broad-spectrum agents like meropenem or antibiotics with high risk for C. difficile infection or other antibiotic-associated adverse events, like fluoroquinolones.79Selective reporting: restricts reporting of susceptibility results of certain antimicrobials based on predefined criteria (ie, broad-spectrum antimicrobials and high adverse drug events). Examples include suppression of ciprofloxacin susceptibility for Enterobacterales, for all sites of infection, when there was susceptibility to other agents on the gram-negative susceptibility testing panel,80 or in its most extreme form, not reporting urine culture results from noncatheterized inpatients, instead requiring clinicians to call the clinical microbiology lab for results if concerns for true infection persist.81,82Result Review and Feedback: results of blood culture rapid diagnostics are reported with real-time decision support using antimicrobial stewardship personnel to assist in interpretation at the time of medical decision making. Studies have been published using this with staphylococcal blood-stream infections (BSI),83 gram-negative BSI,84,85 and all BSI.86 These interventions are known to improve patient outcomes87 and are cost effective.88
    Framing: combines results with free text or educational materials to provide context for the results, changing their relative attractiveness. Examples include adding interpretative guidance on respiratory cultures growing normal commensal flora with a comment “no Methicillin-resistant Staphylococcus aureus or Pseudomonas aeruginosa isolated74,” adding a nudge on a positive C. difficile nucleic acid amplification test with negative toxin enzyme immunoassay test to “consider colonization or early infection,”75 adding interpretation guidance for coagulase-negative staphylococci growing in one of four blood culture bottles (one of two sets) as “possible contaminant,” and adding an interpretive comment on respiratory cultures for β-lactamase-negative Haemophilus influenzae or Moraxella catarrhalis stating, “this organism is predictably susceptible to ampicillin or amoxicillin.”76
    Cascade reporting: reports narrow-spectrum agents initially with subsequent susceptibilities reported only on resistant organisms, for example, reporting only ceftriaxone on ceftriaxone-susceptible Escherichia coli and Klebsiella species77 and only cefazolin on cefazolin-susceptible gram-negative organisms.78 The goal of these interventions is often to reduce the use of broad-spectrum agents like meropenem or antibiotics with high risk for C. difficile infection or other antibiotic-associated adverse events, like fluoroquinolones.79
    Selective reporting: restricts reporting of susceptibility results of certain antimicrobials based on predefined criteria (ie, broad-spectrum antimicrobials and high adverse drug events). Examples include suppression of ciprofloxacin susceptibility for Enterobacterales, for all sites of infection, when there was susceptibility to other agents on the gram-negative susceptibility testing panel,80 or in its most extreme form, not reporting urine culture results from noncatheterized inpatients, instead requiring clinicians to call the clinical microbiology lab for results if concerns for true infection persist.81,82
    Result Review and Feedback: results of blood culture rapid diagnostics are reported with real-time decision support using antimicrobial stewardship personnel to assist in interpretation at the time of medical decision making. Studies have been published using this with staphylococcal blood-stream infections (BSI),83 gram-negative BSI,84,85 and all BSI.86 These interventions are known to improve patient outcomes87 and are cost effective.88
    Challenges: although the aim of these nudging strategies is to improve diagnostic processes to prompt timely action, there is limited evidence to show that they decrease antimicrobial use. More prescriptive interventions could limit clinician input and lead to missed diagnoses.

    Other

    Health system consolidation is a growing trend that has impacted clinical laboratories in recent years encompassing all phases of testing. Laboratory consolidation came into prominence with the development of large commercial laboratories.89 As hospital laboratories have shifted from revenue to cost centers, these commercial laboratories have increasingly sought to purchase hospital laboratories. Some laboratory medicine departments have alternatively navigated a solution to consolidate various laboratory tests and functions within their growing health systems.90 This solution often entails one central flagship laboratory taking on a larger volume of testing, allowing the health system to concentrate resources toward recent technologies and advancements mentioned earlier in this review in one location, which may allow a cost-efficient mechanism for improvements in quality to reach smaller hospitals in the network.
    Thus, consolidation both depends on and facilitates related advancements, a prime example of which is total laboratory automation (TLA). TLA has been particularly impactful for microbiology laboratories, which traditionally have maintained highly complex, manual, and time-intensive test menus. Thus, TLA may allow health systems to continue offering this testing to increasing volumes of patients around the clock as the workforce of qualified technologists continues to shrink, although robust comparisons of outcomes in automated laboratories remain lacking in the literature. Consolidation provides the opportunity for coordination and standardization of such activities, as well as optimal adherence to best practices, reporting, and turnaround time across a network91; TLA likewise may facilitate access to results via technologies such as remote visualization of culture plates.89
    Challenges: A major drawback of laboratory consolidation is the loss of access of providers to the laboratory. This results in disengagement between the two groups and impedes education, consultation, and the close engagement required for policy development in antimicrobial stewardship and infection prevention. Off-site centralization may lead to delays or quality of care. For example, blood culture incubation and workup are a highly complex and resource-intensive process that is increasingly targeted for centralization. Though guidelines suggest that specimens must be placed into incubation systems within two hours of collection to prevent false-negative results,92 significant delays are common when samples are transported to centralized locations. Although technology is increasingly available to mitigate the impact of delayed incubation,93 turnaround time remains of paramount importance for blood cultures. Throughout the process of laboratory consolidation, medical directors and administration leadership must work together to maintain an appropriate balance between financial considerations and patient safety.

    Conclusion

    We have summarized top advances made in the field of clinical microbiology in the past decade (Table 1) that every antimicrobial steward and infection prevention practitioner should know. To justify the costs of incorporating these novel microbiology advances into clinical practice, it is essential for clinicians to utilize these techniques appropriately. For example, developing institution-specific guidelines would be one way to support these key diagnostic and antimicrobial stewardship initiatives.94 This would require a highly collaborative and interdisciplinary approach by working synergistically with key stakeholders including clinical microbiologists, infectious disease specialists, antimicrobial stewards, infection preventionists, hospitalists, primary care physicians, and healthcare information technology teams.
    TJDr. Tulip Jhaveri

    Dr. Tulip Jhaveri

    Infectious Disease · General Infectious Disease
    University of Mississippi Medical Center
    tulip